Learn How to Properly Open and Close Jump Rings

In order to create great chainmaille, you have to be able to open and close jump rings properly. This video shows you the proper techinique for opening and closing jump rings. Using the correct techinque keeps your jump rings nice and round and keeps them from becoming distorted when you work with them.

Centipede Bracelet Tutorial Now Available

If you have been interested in chain mail but afraid to try, this easy variation of the European 4 in 1 is fun to learn and will give you stunning results. As a bonus I have thrown in an easy earring pattern you can create with your left overs! You can get the tutorial for this and many more wonderful jewelry projects on the website www.jewelrylessons.com . The specific link for this tutorial is: http://www.jewelrylessons.com/tutorial/centipede-chain-mail-bracelet-bonus-earrings .

Learn to Make European 4 in 1 Chainmaille

The European 4 in 1 chainmaille weave is one of the easier weaves to learn and is quite versatile when it comes to jewelry design. It can be used to create necklaces, bracelets and earrings. I have found a CGI video that illustrates how to start weaving 4 in 1. You will find this video below. For another video that actually demonstrates someone showing you how to do the weave use the following link: http://vodpod.com/watch/918188-how-to-make-chainmail-2.

CGI Video Demonstration of European 4 in 1:

Learn How to Etch Copper, Bronze, Brass, and Aluminum

I have a new tutorial available at http://www.jewelrylessons.com/jewel/node/15673 that teaches you how to etch copper, bronze, brass, and aluminum using muriatic acid and hydrogen perioxide. Etching metal may seem intimidating, but it is actually quite easy and can allow you to create unique one-of-a-kind designs. Anything you can draw, or any picture, photo, or pattern you like can be copied onto metal. Traditionally ferric chloride has been the mordant, or acid, that has been used to etch copper, brass, and bronze. However, it is relatively expensive and sometimes hard to find. Muriatic acid, or hydrochloric acid, works just as well and is considerably less expensive. Muriatic acid can be found at your local hardware store, usually in the pool care section of the store. The resist is the portion of the design that won't be eaten away by the acid. Just about anything can be used as resist as long as it "resists" water. Permanent marking pens, nail polish, duct tape, vinyl stickers, Stazon stamping ink, etc. may all be used. With the advent of photocopiers and laser printers, a technique was developed that allows the use of more complex designs. A high contrast, black and white image can be copied onto an overhead transparency and then transferred onto the metal with an iron. The focus of this tutorial will be using the overhead transparency method of image transfer and muriatic acid to etch metal.

Learn How to Make a Byzantine Chain

The Byzantine weave is a variation of the Box chain and can be thought of as an alternating Box chain. This is another easy to learn weave and is great for someone just getting their start in chainmaille. As with all chainmaille, it is crucial that the correct ring sizes are used when creating your chain. For this particular weave the recommended ring sizes are as follows:

• 22 gauge, Inner Diameter: 2.5mm
• 20 gauge, Inner Diameter: 3.0mm - 3.5mm
• 18 gauge, Inner Diameter: 3.5mm - 4.0mm
• 16 gauge, Inner Diameter: 4.5mm - 5.0mm

Watch the great video below from www.jewelrysupply.com to see exactly how easy it is to create a beautiful chain with a few simple steps.

Learn to Make a Box Chain

The Box Chain is one of the easiest chainmaille weaves to learn. I have found a video created by the folks at www.jewelrysupply.com that does a great job of showing you the easy steps involved in making this simple, yet lovely chain. In the video they recommend using 18 gauge 7 mm inner diameter rings. Rings smaller than 18 gauge in diameter are not recommended when used for heavy wear. I agree with their recommendation whole heartedly. The watch I have pictured in today's blog was one I made for myself using 22 gauge sterling silver jump rings. While the watch band turned out beautifully, it was not heavy enough to stand up to every day wear and the rings ended up pulling apart after a few months of wear. It was one of my first chainmaille projects, and I was not experienced enough to know better! Don't make my mistake. It is always a good idea to find out recommended ring sizes before starting a project. Here some links for websites with recommended ring sizes for particular weaves: http://www.venomspit.com/ and the Maille Artisans website at http://www.mailleartisans.org/articles/subcat.cgi?key=5 .
Enjoy the video below. It beautifully illustrates the steps in making a box chain.

Learn To Make Your Own Jump Rings

Jump rings are an important staple in your jewelry making arsenal. They are essential findings that help you join together elements of your design or they can become the design itself when woven together artfully in chainmaille. Learning how to make your own jump rings can save you money and allow you to become more creative in your design work.

For a great free tutorial that teaches you how to create jump rings using cutters look at www.jewelrylessons.com or use the following link: http://jewelrylessons.com/jewel/node/14209


To learn how to make saw cut jump rings, watch the following video from Art Jewelry Magazine:

Video Demonstration Of How To Make A Simple Soldered Ring

For a great video demonstration of how to make a simple soldered ring band check out the following:

http://www.5min.com/Video/How-to-Make-a-Ring--in-Few-Simple-Steps-2152


For techniques you can use to give your newly created ring a little personality look here:

http://www.5min.com/Video/Upgrading-a-Ring-You-Have-Made-2162

Wire Work Secrets Jewelry Making Tutorial Lesson 1: Jump Ring Crash Course Instructional Video

Wire Work Secrets Jewelry Making Tutorials Lesson 1: Jump Ring Crash Course - kewego
From WireWorkSecrets.com, this jewelry making tutorial video is Lesson 1 in the free 5 lesson video e-course Wire Work Lessons. More free wire working lessons available at wireworksecrets.com Learn pro jewelry tips and tricks.

Keywords: jewelry making wire work wire working jewelry tutorials jewelry making instructions

Video from h2girl18

Learn How to Hand Knot a Beaded Necklace

Pearl necklaces have been traditionally been knotted so that if the strand breaks, all of the pearls are not lost in a shower of beads upon breaking. This is an excellent way not only to protect your pearls but also your expensive gemstone beads. Contrasting colors of bead cording can be used as a design element to add interest to your work. Thread is available with needles already attached to make life even easier.









Photo courtesy www.azuretreasures.etsy.com


Watch the video below from www.jewelrysupply.com for step by step instruction on knotting between beads. All you need is a few beads, beading string, a needle, and a pair of tweezers.

How to Make Personalized Metal Jewelry

If you've ever wanted to learn how to make personalized metal jewelry, you can find out how by watching the wonderful instructional videos made by Lisa Niven Kelly from beaducation. In these videos you will learn all the basics of stamping on metal. In this demo, Lisa discusses the necessary tools and teaches you how to make a pendant by stamping on a metal blank, punching a hole, and oxidizing. So get out your letter stamps, bench block, and hammer and stamp away! Learn how to make a stamped pendant for jewelry making. Check out www.beaducation.com for supplies and more educational videos.

Make Your Own Headpins

You can save money by making your own headpins. An inexpensive butane torch can be used to ball the ends of fine silver or Argentium silver. The technique to do this is quite simple. You simply cut the wire to the desired length and then hold the wire in the torch's flame using pliers until the wire balls up. Watch the video below by Jennifer Kramer of www.cageycrafters.com to see how it is done:




Another method for creating a unique headpin is to use wire wrapping. A free tutorial is available on www.jewelrylessons.com to show you how to make a simple, but interesting headpin. You can find it at this link: http://jewelrylessons.com/jewel/node/3139

King's Scale Tutorial Now Available

If you are interested in learning how to make this simple but gorgeous chainmaille weave, a tutorial is now available at http://jewelrylessons.com/jewel/node/12485 . This weave works well both as a bracelet or a foundation for a beautiful necklace. This particular weave is known by several different names including the King’s Scale or the Vertebrae weave and is a derivation of the classic European 4 in 1. This bracelent and one like it are available at my etsy shop. http://www.simplydevinedesigns.etsy.com/.

Use Aluminum Foil and Baking Soda To Quickly Clean Your Sterling Silver Jewelry

Most sterling silver contains copper which oxidizes when exposed to the elements. This causes your sterling silver to tarnish. Follow the steps below for an easy way to clean your sterling silver:

1. Gather all of your tarnished pieces together and place them in a plastic or glass dish that you have lined with aluminum foil. Make sure that all of the silver touches the aluminum.
2. Sprinkle a thin layer of baking soda over your jewelry.
3. Pour enough boiling water over the jewelry to immerse it completely. Bubbling should occur. After the bubbling begins you should notice a rotten egg like smell as sulfuric gases are released by the cleaning action.
4. Stir the jewelry with a wooden spoon to make sure all of the silver comes in contact with the aluminum foil. Continue stirring until all of your silver is clean and shiny.
5. Remove the silver and rinse it with tap water. Be sure to close the drain so that you don't lose any small pieces like an earring!
6. Rub your jewelry dry with a soft cloth.

Tips and Warnings:

To prevent or slow future tarnishing store your jewelry in air tight plastic bags. You can get anti-tarnish strips or moisture absorbent packets to place in the bags to further slow down tarnishing.

This method of cleaning may be harmful to certain gemstones, for example, turquoise. I have used it with pearls and had good luck. But if you are in doubt, try using a polishing cloth designed specifically for cleaning sterling silver such as a Sunshine Cloth.

Here is a link for a video demonstrating the technique:

http://www.expertvillage.com/video/160769_clean-sterling-silver-jewelry.htm

www.1000 Markets.com

Today I discovered a new website (at least new to me!) dedicated to selling handmade artisan goods. What makes this site different is that you have a blog attached directly to your shop, allowing your customers to get to know you and get a feel for your personality. This also gives you the opportunity to give your customers some fun facts about how your jewelry is made and what makes it special. Listing items is free on www.1000markets.com . The items are checked out through Amazon. Amazon will then take out take a 5.5% cut plus 50 cents at the time of payment.

I got busy today setting up a shop and am waiting to see if my shop gets it's final approval. (Keeps fingers crossed.) I did find several nice jewelry shops that I thought I would share with you.

Here is a lovely pendant created by Tangerine Treehouse:













http://www.1000markets.com/users/tangerinetreehouse


Here is another lovely necklace from Stone House Studio:













http://www.1000markets.com/users/stonehousestudio

Etsy Shop Now Open!

Chainmaille Cross Earrings available at www.simplydevinedesigns.etsy.com. A tutorial will be available soon for these earrings at www.jewelrylessons.com.

I finally made the plunge and have opened an Etsy shop called Simply Devine Designs. Look for it at http://www.simplydevinedesigns.etsy.com/. I will also be creating tutorials for the new website http://www.jewelrylessons.com/. This great new website was created by Eni Onken and has some fantastic jewelry designs and wonderful how-to's from a group of talented jewelry designers including Delia Stone. I plan on creating tutorials for some of my chainmaille designs including the cross earring design pictured above and a vertebrae chainmaille design that is a variation of the European 4 in 1.